Ender 3 Pro – Firmware
Note: You must run full calibration when using any firmware below, not every printer is the same! Go here for a fantasic step by step guide
| Firmware ID: | #3 |
| Printer: | Ender 3 Pro |
| Board: | V4.2.2 board – non-silent |
| Mods | Notes: | 400x400x500 Extention kit, everything else is stock |
| Custom Name: | Ender 3 Pro 400XL |
| Firmware Version: | Marlin | BugFix-2.0.x |
| Compiled By: | Doom56.com, Jason Pointer |
| Bin file | Download |
| Source code (.zip) | Download |
| Firmware ID: | #4 |
| Printer: | Ender 3 Pro |
| Board: | Big Tree Tech, SKR 1.4 Turbo |
| Mods | Notes: | BTT S42B v1.1 42 Stepper Motor Closed Loop Driver Board with OLED Display on X & Y (Link) Note: Y -axis is on open loop due to extra bed weight BTT TMC2209 V1.2 UART Stepper Motor Drivers (Link) Note: Used for Z1, E0 & E1 BTT TFT70 V3.0 Display Touch Screen (Any BTT TFT screen will work) (Link) (Extra features enabled in Marlin when using the latest TFT firmware) Micro Swiss Direct Drive Extruder kit (inc all metal hotend) (Link) Creality BL Touch V3.1 (Link) SATSANA Ender 3 Remix for Micro – Swiss Direct Drive + BLtouch (Link) ENDZILLA 400ZXL (Link) Note: Volume Size 400x400x500 Dual Z-Axis ZXL (Link) Note: Z1 uses Z1 Driver & Z2 uses E1 Driver so both run independently when Gcode G34 is used in the starting G-code in your slicer OctoPrint (x64 BETA) running Raspberry Pi 4 (4Gb edition) |
| Custom Name: | Doom56.com |
| Firmware Version: | Marlin | BugFix-2.0.x |
| Compiled By: | Doom56.com, Jason Pointer |
| Bin file | Download |
| Source code (.zip) | Download |